Search results

cobra 29 nw Here's another weird one about this radio!.It looks orangeish green color on receive and when you slide the cb/pa switch to pa it turns solid green? any clue to this one . :?:

cobra 29 nw classic Ok! i jumped the pins just to make myself happy that it was'nt the mike.No key up or red led,thnx for the info dtb i'll check it out tomorrow.I have plenty of old cobras laying around for parts,it's very possible it's the 8volt regulater and i'll look under the microscope...

My problem with this radio is that it's rx is fine,but when i try to key up the led light goes out(no red).I've checked the pa with an external speaker and no modulation.The weird thing is if you look close enough to the led it try's to change to red when you key up?.No dead key carrier at...

Ok! sir tech man hahahaha!,thanx for the info on volting the mosfets.And i'll change out the choke's,and R-178.Thankyou very much for the support sir thats what i love about galaxy radios, is the support and the awsome modulation strait out of the box. bigun (p.s) Why would a...

Guys i got a crazy question for the galaxy tech! Is it ok to volt the finals if you have the irf520 mosfet finals?.Hope this was'nt a stupid question,but i damn sure dont want to burn this new bad boy up!.It damn sure does swing like crazy,and loud as hell i'm impressed with this new radio!.And...

galaxy 959 I've always run the galaxy radios and i can tell you this.The tech support is awsome,2 year parts and labor waranty,cant beat it sir.As for the galaxy 949 and the 959 they are very stable radios,easy channel mods if you decide to do them.And as for peaking&tuning that radio i...

clay's radio shop I agree i own my own shop and you should stand behind your work regardless of who's problem it was!.You! are the consumer,and should have satisfaction.Clay's radio shop should have took the radio back and payed for shipping,plus sent you a new radio(peaked&tuned)and they...

Yes it is easy to do the channel mod BUT! be very careful when pulling the resistor up off the board.Only heat it for about 1-2 seconds and lift it up! do NOT! pull on it cause it will rip the trace off the board.just food for thought, bigun

clean modulation! connex 4400hp,now thats LOUD.Just keep the dead key at 3-4 watts and 95% modulation.Enough said!. bigun

connex 4400hp Thats true any connex board with the ept#6900,etc.is made i believe by rci(ranger)

connex 4400hp VERY LOUD AUDIO! my picks would be connex,all ranger radios,galaxys,cobras.It's what looks good, and works for you! bigun 8)

150 gtldx! Guys i'm really impressed with the quick and curtious ways of h&y electronics!.And yes they are only 99.95 without s&h,cant wait to play around with this one!. bigun (p.s no offense to you dtb)

I agree wit cha 777 hunter,bigun297 in da wheat fields of ks,i'm back out.

cobra 150 gtldx Why the f**k would they block them?. it Figures, i just ordered one the other day. damnit man. hahahaha bigun :evil:

Thnx for the info guys really appreciate the words of wisdom!.I've got the idea,thnx. :shock:

ok! Thnx for the reply.I'm in the learning mode. :shock:

Hey guys quick question!.Should i see any modulation(swing on the rf power meter)in fm mode?Radio is my connex 4400hp.If so,i must have a problem and what would that be?. Thnx bigun297. :?:

hahahahaha! Hahahahahaha! love the silicon look.I just started working on radios and i would be ashamed to sell that radio looking like that! bigun :P

erf 2030 My question is,can i just change out the final or do i have to do the mosfet mod?.My radio is a connex 4400hp,it has the 2312s(dual) finals. thnx bigun :?:

Hahaahaha! hey jedi thnx for the reply,what i ment was i have (4) 6lq6 tubes & (4) 6jg6 tubes.I agree i need to keep the dk at 1-3 watts to not overdrive the amp am i thinking right or not?.And if you have any info on how to tune this dude up! i would really appreciate it sir!. LOVE THAT...