Search results

well, that is better than the alternative<More audio>

obtaining the "best match" at the radio and operating at the antennas resonant freq are often not the same. get the antenna resonant at the freq you want to operate on first,...... if you want to, you can then make adjustments at the radio end (or use a tuner) to make the radio "happy"...

tuning stubs are no more "frequency agile" than a 102" whip. a "tuning stub" and a "trap" are two different animals**Jump_im**

? ok,... take two exactly the same meters, put one @ the feedpoint, and the other 1/2wl back , they "should" (more or less) read the same. now, change the 1/2 wl feedline to some other random value. does the meter @ the feedpoint change value?.... No does the other meter change...

naw,....... the U.S. guberment would never do anything like that:whistle:

ok,... when does it crash? in a certain mode? CW, PSK,??? are you using a USB to Serial port converter?, many of them have issues. download the latest free version of HRD 5- which is 5.24.0.38 http://hrdsoftwarellc.com/downloads/default.html Try doing an install over what you have-...

I'll play a while on 2 & 6 meter ssb from EM55<More audio>

really,... about where are you located?

does that mean you can't find a local V.E. session?, or that you are too busy?

another tip that will save you,..... before you open the top & bottom casing,...... put the entire rotor in a cardboard box and work thru the opening in the box top. unless you like chasing ball bearings :D

ya might want to slow down a bit and find out EXACTLY what all that "auto" logging/scanning stuff is about:wink:. I'll bet what he is saying and what you are hearing are two different things. good luck

also notice the size/ diameter of the coil,.... the diameter is the same as the length, also called a "1x1" coil....... guess what happens when some golden screwdriver streaches the coil:crying:

go here http://us.yhs4.search.yahoo.com/r/_ylt=A0oG7pChAq5RIAYAv4UPxQt.;_ylu=X3oDMTByamlqaW9mBHNlYwNzcgRwb3MDMwRjb2xvA2FjMgR2dGlkAw--/SIG=11maejret/EXP=1370387233/**http%3a//www.eham.net/articles/23320 it explains WHY min Vswr and resonance may or may not be @ the same point,.... and the...

actually, they are 90 degrees out of phase go here: http://us.yhs4.search.yahoo.com/r/_ylt=A0oG7qdFCKpRfhoALQAPxQt.;_ylu=X3oDMTByMTNuNTZzBHNlYwNzcgRwb3MDMgRjb2xvA2FjMgR2dGlkAw--/SIG=11m6qvslc/EXP=1370126533/**http%3a//www.eham.net/articles/18584 this is how antenna analyzers can "compute"...

a 1:1 balun won't change the feedpoint ratio at all. the impedance of a dipole changes as the height above ground changes,.... raising (or lowering) the ends will change the impedance.

listening on 7.235 for a while, but all i can hear is the group on the 7.234 Remote (n4piq/R)

actually, "type acceptance" is also long gone,.... it's now called "certification":biggrin:

Dit Dit Dit Dah,....Dit Dit Dit Dah,... Dit Dit,Dit Dah:oops: QSV?

screwdrivers and stepIR's are nice:D