• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!

Search results

  1. moose

    speaker swr?

    For all intensive purposes you will be fine with the 4ohm. If you run two 4ohm in series your radio will 'see' a 2ohm load. If you intend to keep the volume above 50% most of the time you might want to use an 8ohm.
  2. moose

    FC347 bad display

    Are these displays replaceable? I got one of the blue face ones and one of the numbers is starting to crap out. Also would it be possible to put either a red or green one in? The blue drives me crazy.
  3. moose

    Tapatalk problems with iOS5

    I am having a problem with the 'participated topics' tab loading but that's on a different board entirely. Do you monitor all the boards?
  4. moose

    Tapatalk problems with iOS5

    No topics or posts were loading. I removed and reinstalled the app after the upgrade and that seemed to fix it on this board. Thanks!
  5. moose

    Uniden Pro 510 question

    The two 510's I have here we use on the quads when we go ride. We usually stay on ch3 and even after they sit in the shed for a while they power back on channel.
  6. moose

    Tapatalk problems with iOS5

    Anybody else having problems with Tapatalk working?
  7. moose

    WTB: DX77HML or DX99V

    Preferably with 3600 series board. In working order. PM me Thanks! :D
  8. moose

    VHF Marine radio SWR

    Points understood. It was a 50' piece of coax that I pulled out. (It's only a 20' boat) they had the coil and the rest of the wires (sounder, FM radio, 2nd battery) all tie strapped together. Also, the battery tender was on the batteries themselves, we weren't running the radio solely with...
  9. moose

    Cb radio operators

    I get more skip contacts with my little setup then I ever thought I would. Conditions have been pretty consistent that I can reach the upper east coast in the morning and central, southern cal and sometimes Hawaii in the evenings. I can hear the people I am trying to get talking to other...
  10. moose

    VHF Marine radio SWR

    Found it. Got to really digging into the install that the dealer did and wasn't impressed at all. The SO259 on the back of the radio was loose so tightened that up. I got my PRO-106 scanner out, tuned it in, put a rubber band on the mic and went to shaking everything. First off the excess coax...
  11. moose

    Astron power supply

    Good deal! You pay a little more and have to wear a back brace but you won't be disappointed!
  12. moose

    VHF Marine radio SWR

    I installed a VHF in my boat when we got it really for emergencies. (Had an experience offshore a long time ago and the VHF probably saved our lives.) Every time we go out I turn it on 16 just incase. We were doing a poker run a couple weeks ago and was talking to another boat on ch72 but...
  13. moose

    Schottky diode and 2SC2999 swap on EPT3600 board

    Has anybody heard anything from DTB Radio? I sent an email about a week ago to see if be would take my radio and haven't hear anything back yet.
  14. moose

    Schottky diode and 2SC2999 swap on EPT3600 board

    Well, let me rephrase... :D It hasn't been to see a "Dr." in seven years. So been playing with it for seven years straight and in the last year since the skip has been picking up I her been playing with it incessantly. So, maybe I made the RF gain knob "scratchy" :):D
  15. moose

    WTB: EPT3600 board

    Bumpety bump!
  16. moose

    Schottky diode and 2SC2999 swap on EPT3600 board

    Thanks guys. The radio hasn't been touched since around 2004. With the cycle coming back as good as it has down here I have been using it more and more. Plus when I travel for work I use it as well in the mobile. The ground noise I'm getting is pretty bad. The other day as a base i was getting...
  17. moose

    Don't miss this gem on Ebay!!!!

    Was it in an accident? Holy ........
  18. moose

    Schottky diode and 2SC2999 swap on EPT3600 board

    I have read all the threads and am pretty confident I can do the parts swap. What I don't have the equipment for is the alignment after the fact. So, my question being has anybody sent a similar radio to a shop to have the swap/alignment done and would they recommend them? Thanks!
  19. moose

    WTB: EPT3600 board

    Non-functional is fine. PM me.