Search results

How would this astroplane compare to the super penetrator 500 antenna?

Hey hotrod, The sx-175 is a complete cabinet with top and bottom covers. You remove your stock covers and install the new magnum covers. The magnum covers have magnum on top cover and bottom cover has the heatsink and amp board built into it. Looks very cool when done. The rfx-150 mounts on back...

EPT295013Z board....

Can someone tell me where I can tap into 8v on transmit on a rci-2950 radio? I am installing the magnum sx-175 on it and need a 8v transmit source. Thank you....

Bump

Where can you buy one ? Do they still make these ?

Come on guys I need your help.....

I got a nice condition magnum S-680 with the 4 2030 mosfets in it. Suppose to be a 80 watts radio and the lights are all green on this one. I am having several differnt problems with it. radio powers on all lights come on and radio receives great but has no transmit at all non. Second problem is...

Turn her off then it's bad now....

Ok I found a wire that was added under the tube board to a resistor that bypassed the resistor. I took it out and the dead key dropped to 6 watts better and is still swinging 15+ watts. I just need to get it down a bit more.

Ok guys thanks for all the help here but I am so very confused now. My dak 9 has two tubes VT-701 and VT-702. Now in the VT-701 socket my dak has a 6L6GC tube and in the VT-702 socket it has a 6W6GT tube. Can someone explane to me what each tube is for and if these are the right tubes for this...

What tube would cross with a 12by7 tube ? thanks for all your help

So the 6L6GC tube and the factory 6DG6GT tube are the same so i could use either one with no problems? Also are you saying the 6L6 tube has more power than the 6DG6GT tube. The radio right now is keying 9-10 watts and swings pass 20watts. I need to get the DK down to around 3-4 watts. Would...

I need to know what tubes will cross with a 6L6GC tube. That is the tube in my dak ix and it is suppose to be a 6DG6GT. Will those tubes cross or has the radio been modded to take the 6L6GC tube. Thank you....

Can anyone tell me how to get the dk down on this radio? It is dead keying 8w swinging over 20w.

Forgot to tell you they are 47uf 450wv caps.

I removed this cap from my dak 9 radio because the top was rounded like it is bad so im wanting to replace all 3 of these caps in the rf section where the tubes are. here are pics of the cap. I can't find them anywhere.

Come on guys I need help here.....

I got a beautiful looking and working dak 9 today and it works perfectly the only problem im having is the dead key. The radio is dead keying 8 watts and swings over 20 and i need to turn down the deadkeyto around 2-3 watts so I can run my box with it. Thanks for any help......

I have a new in box Uniden PC-78LTW. Radio has been remove to be peaked & tuned and swing kit installed. Very loud talking radio new in box take 100.00 shipped. Also I have a Cobra 29 Lx chrome in good condition peaked and tuned with swing kit. Comes with factory mic, mounting bracket ,wiring...