Search results

Greetings to the forum... I have acquired a Galaxy DX-959 and have found that the USB/LSB TX freq is not tracking properly. I have performed the freq adjustments so they sound good using a RCI2950DX & DX70TH as monitoring stations & can make contacts once adjustments are complete. When the...

I ditto what the others have said. The RCI29xx series features the Split operation function as mentioned in an earlier post and can easily resolve the issue you are experiencing. Our local group is more conciencious about how each of us sound to each other so we aren't tuning the Clarifier...

dxhound, sounds like you are off to a good start. I did a similar set up with the 110v wall outlets however where I had one outlet placed under the desk, I also placed one above the desk. This allow's me to plug in the soldering iron and other frequently used accessories with out getting under...

Hi all, It appears I didn't hit 'submit' on my post yesterday - my bad... Moving forward, I pulled the 11m echip, powered on the radio and it reverted back to the dual band function as expected, however the memory function didn't work. I plugged in the echip and the memory function didn't...

I will attempt to get into the shack this evening and look at the radio again. I will report my finding's. Thanks for the feedback...

Fodendaf, What does the 11m echip look like and where is it located? I ask because when looking inside my radio, I can see jumper pins on the backside of the display (where I believe the jumpers should be) however no jumpers are present...there is a short pigtale leading to a PCB wrapped in...

I reveiwed the schematic and as DXman stated...I didn't see a battery. I will continue to play around with it and see where it takes me. I will miss scanning the 10m repeaters stored in the memory. It's not the end of the world as it still scans the freq's. Wire Weasel, DXman - Thanks for...

If this does have a Battery, I am unsure where it is located at. I will review the schematic and follow up... 73's ~ dxbarefoot -Brian in Iowa

Greetings to all, first time poster, however long time monitoring. I have an issue with my RCI2950DX (aprox 13yrs old)...The SWR, MEM and Enter button's do not work any more when pressed. I noticed this when I wasn't able to access the memory channels. I expernenced this aprox a year ago and...