Search results

Thank You Sonoma I will give it a try.

Thanks nomadradio for info. I have transistor checker , multimeter, wattmeter and dummyload do not have oscilloscope. I could not find any voltages charts for this radio. I believe it has the 3600 board in it and thanks again.

I was hoping that I could test finals in radio without removing them but do not know what voltages and location on final.

I picked up a nice galaxy Saturn but it has no transmit output power. The TX light comes on and I can hear sound thru another radio when I key up Saturn but no watt meter reading at all. The receive seems to work fine except I have to turn volume up to at least midway setting to get decent...

C706 took just a haft turn to tighten it up and no change dang it so not the problem . Will start some more research .

nomadradio Thank you I will try that tomorrow and see if that's the problem.

I have a Tram 201A and when on LSB or USB it has a high deadkey and modulation light does not blink but stays bright and modulation not working right. I have tried other microphones and no difference. Any idea's please. Also has a hum thru speaker on sideband but not AM.

I have a Tram 201A receives and transmits fine on all channels when in crystal position but when I switch to manual channels 31 to 35 on VFO are not working also no receive in any of those channels when in selector position 31 to 35. The only thing common with all those channels is they use...

nomadradio and gigoni I thought this was a early version when I bought it. It has surface rust all over but no holes or bad places. With tubes keys up in all positions but I have no power output . I will try to fix or get it fixed if not will sell it to someone that will restore it but on shelf...

I have a old 12 tuber D&A that is different than any other I have seen. Has a top cover and bottom cover plus has two tuners and grid screw on left side of amp plus two and switches on front. This is probably close to first ones built maybe??.

Hmmm no comments about amplifier what a beast Vader is. That amps wiring upgrades I would have to do would stop me plus the fact I am too poor to afford one. I guess I'll just stay with my little sweep tubes amps and my big move will be to my Heathkit SB220 sitting on shelf someday.

Thanks giboni it is a nice amp and I do not know how it does it over 1000 watts pep easy. Stray rf could be affecting my watt meter possibly causing increased number. Using a galaxy 44v mobile 2 watt dead key radio swinging to 20 watt pep. I like amp because it is made of all aluminum and will...

giboni here are some more pictures of inside

The power company came out with their hand held RF detector and checked my lines no problem there . They went down street and found some RF coming from a dead headed line from another power company coming down partial way of my street but would not use RF detector on pot growers house they...

Does anyone have some pictures of the inside of a Transel Nitro 300 linear amplifier or a schematic of same. I have one showing no out put .Thanks

Power company showed up today and transformer ok but employee is going to talk to engineers at company about RF noise and have them bring a mobile detector out to check lines also. The employee told me that the grower had converted entire two car garage and power company had to update his...

Called power company and was told they would come out and check transformer and lines to see if causing problems and give me a call back on results. No answer from them yet. Cost of Mfj 1026 stopping me from getting one right now but will have one soon to try and see if it works. I will always...

Thank You wavrider and Tallman . I will call power company and make complaint and look into mfj1026 I believe there is someone close who will let me borrow one to see if it will work for me. As far as marijuana I will do everything in my power to complain, protest and do what ever works to stop...

It looks like a lot of pot heads or people inclined that way commenting on post. I can see absolutely no benefit to making marijuana legal even for medical use. Every one that I know that has a medical card here were pot heads 40 yrs ago . I guess they have been having medical problems a long...