Search results

By law they have to resolve the issue to the best of their ability.. As Capt stated call your local utility give them the physical location of the pole. Most of our poles will be labeled with tag pole #. Also all transformer and overhead equipment poles will have a device number on the pole as...

Don't know if it the "Best" 2 meter mobile but the Larsen nmo 2/70 has always been a well performing mobile antenna. Comet and Diamond make some jumbo high gain mobile antennas but sometimes they don't hold up as well with mobile abuse.. I have limited experience with 2 meter only mobile...

You can take it a step further with explaining when and where the Got down occurred with "I just got down right there"

Heard them on 10 ssb Sunday. 5/7 signal at times. I had no luck working them yet. Op was working 25 to as much as 40 up split.. huge pile up. Even when I figured out where he was listening, my 100 w and Imax at 40 ft just didn't cut the mustard unfortunately..

That's very unfortunate news. You might consider a Yaesu rotor. I ran a G800 model for years with no issues until about 2 yrs ago. It was a mid 90s model and had never been touched. The potentiometer final let loose in it.. this was expected since it was starting to act squirrely. This is a...

I know I figured Capt... that was just my weird sense of humor showing.

I have no experience with the RM brand filter but I had a para dynamics years ago that had little affect on filtering anything at my old home. I picked up an old Bencher YA-1 low pass filter. Much higher quality unit that actually filters..

I read in the description "I do place identifiers in all my electronics." So... does he place LoJack inside?

The answer to all these comments about the loud harsh noise between transmissions on FM...is......drumroll.....SQUELCH!

It's unfortunate what .425 has turned into. Last cycle it was a great hang out with few if any asshats.. now that's about all you hear..

It's cool that you're trying to revive 10 AM. I have worked a handful of AM stations through the years but I usually forget to even roll through the 29.100 area of the band. For me it's always SSB or 29.600 simplex with the occasional repeater work... Guess I need to listen there more often...

Like a bunch of guys that have NO concept of what working split is.

This will create one of largest pileups ever seen..

The internet and YouTube are your friends for the information needed for correct measurements and installation. I did my 1/2 hardline N connectors with simple hand tools. Use a sharp knife and take your time.

The frequencies you list seem odd.. when adding. 0015 to all things would make more sense. 98% of all contacts I've made on 11 meters have been on even 5's of flats... 27.515, 27.435, 27.425, 27.420...etc. Might want to investigate this. Compare to another radio..settings...alignment. Anyway...

I hear AK 2525 Bill from the pacific northwest almost daily. Just like last cycle...

I have a couple runs of Jefa.. no problems I also bought a 500ft reel of Shireen lmr400 knockoff and split it with a buddy. No issues with it either.

Looks like an artifact recovered from the Titanic

They also offer a model that does 1200 watts ssb 160-6m for $2800. Not bad at all for a over a kw solid state on hf&6... in my opinion..

Top picture is Rohn. Rohn 45 has 16.75 in. leg spacing. Rohn 20 & 25 has 11.25 in spacing. The ROHN 25G Tower Section is 16 gauge steel Tubing, whereas the ROHN 20G Tower Section is 18 gauge steel Tubing. The ROHN 20G 10 Foot main Tower Section consists of 6 bays spaced approximately 18.25...