Search results

Hi again, I am about to build a copy of Moleculo's "Coil Loaded Dipole". My last question is about the ladder line. I have no choice but to run the ladder line within 2" of two 8" HVAC ducts. Is there a way of insulating the 450 laddder line from the ducts? Also how do you connect a YA-1...

Not yet, I still have grounding to do. It works well at medium power and with all the repeaters in the area I usually have it set to low anyway. I just haven't run into the problem of having to use high power yet. I'm sure that it will come back to haunt me when I want it and can't use it...

I can answer some of these. Install a capacitor near the battery. Farrite cores go on the power leeds as close to the radio as possible. Cores also on the coax as close to the antenna as possible. For the cores I used the type that clamp around the wires. I used 3 at each location. Also...

That looks absolutely awsome. Wait to go Craig. I wish I had a setup like that.:thumbup:

I looked on the qrz.rz site through the friend link that you provided. The answer to your question was right there. Here is the image from UN7ZL: http://forum.qrz.ru/attachment.php?attachmentid=51659&d=1307783309 The label (if it is from the radio in question) shows that it is the USA...

Here is the english translation from Google Translate. "hello, I have the serial cable and program from Quansheng, I manage to read but not write a program to rebuild the list of frequency on a TG-Quansheng UV2. Who can help me!! Thank you"

Oops, I just saw this post. I had the same idea as you about the G6. I sent an e-mail to the tech dept. and asked if the G6 would work with the FTM-350. They replied that the G6 is only comparable with Kenwoods. The 350 would not work. Sorry.

Well you will be out of luck interfacing the AVMAP G6 with the FTM-350. I sent a e-mail to the tech support department and they said that it will be incompatable with the 350. I had the same idea as you. The g6 will only with Kenwoods. Sorry.

Do you want it for voice or digital modes? One way to control your computer remotely is to use a program called Teamviewer. Here is the link:TeamViewer - Free Remote Access and Remote Desktop Sharing over the Internet. It is free for personal ues. It can be used on Windows, Mac, Linux and...

Wireless N is definately the way to go. It is what I use and I can control my computer from anywhere around my house now. It is slick.:thumbup:

Well I tried it on my 1st generation ipad and it works really well. When it first started it was a little sluggish but that went away after about 60 seconds. Smooth and steady there after. :thumbup1: I LIKE IT!:tt2:

Thats AWSOME!!!!!!!! :thumbup: I know what i'm going to set-up tonight.:laugh:

A couple of quick questions. Is your radio on before HRD is started? HRD needs the radio to be on first. Have you checked all your connection settings? What are you using to connect your computer to the radio?

Of course you can.:) APRS runs independently on the B Band. You can transmit tones and such on the A Band. The only time that transmit is interrupted is when the radio beacons or you transmit, one cuts off the other. One quick way is to just turn the B Band off by holding the A Band...

Does the cable plug into the data port on the radio and usb port on the computer? If so then it will work for updating the software.

Here are the frequencies that the VX-8R/DR will receive out of the box. No modification necessary. The mod only expands the TX of the radio. To test it to see if it works you can try transmitting on the marine vhf band if you have access to a marine radio to receive or you could do the same...

albertr was correct about locking the radio with the power button however if you want to lock the PTT you need to change the setting in the menu. The default is set to KEY&DIAL(the PTT still will function). You need to change it to one of the following: PTT / KEY&PTT / DIAL&PTT or ALL. The...

That is my problem, finding a cable that will work with the FTM-350. I can't find anyone that makes one. I amnot partcular about which TNC I just hope to only spend $100 or less. Ant sugestions on the cable and a quality TNC?

Can anyone tell me if there is a way to convert the data comming from the built in TNC on the FTM-350? I have the usb data cable pluged into my radio and my laptop. I can get it to work well with UI-View and APRSIS32. No problems at all. I want to use that conection with AGWPE but it...

Dosen't really matter. Both cables are sheilded. I have 2 RG-213 cables running about 40 feet in the same raceway and haven't had any problems.:biggrin: