Search results

Yes I have two xl-600’s and was wanting to make a xl-1000 out of the two any Info would be helpful. I know they both use the same cabinet, the 1000 has one more driver tube and two more final tubes and one more transformer. I think I have all the parts needed just need some technical information

Yes I am rebuilding a BLJ 500 Tube amplifier and was wondering what value of bleeder resistor I should use ohm and wattage. Thanks

Yeah I recently acquired this antenna analyzer From a friend of mine and he said it worked fine until he wired up the power cord backwards and plugged it in! It was the right voltage just the wrong polarity. It will not power on now not that I’m surprised just want to find out what all I need to...

Yes I have a RFX-150 and it is missing D6 was wandering if anybody knew what I could use as a replacement. I have a lot of regular size diodes if I could use one in place of smd component. Thanks for any help or info!

Yes I have a galaxy DX 99V and I am having a hard time getting any modulation with a deadkey lower than 4 watts. Once the dead key reaches 4 watts the modulation picks up like it should. SSB is fine. Also the Clarifier has more range than it should Making it hard to tune in on sideband. The...

Yeah I am trying to wire up a Astatic Model 877L mic to a 4-Pin Cobra. Can’t find any wiring diagram for this mic. PLEASE HELP!!!!!

Okay I recently purchased a used 2000 and upon receiving i noticed a weird modificaton. It is using the CB/PA switch and is hooked up to the PLL area and consists of: 1 - c945 transistor 2 - 4148 diodes 1 - 10k Ohm resistor Also there is a 4148 diode on the bottem side of the power supply...

Yes i am having a weird issue with my squelch when i turn it all the way to the left it silence's the audio completly even with a +30db signal, when i turn it to the right the audio comes back. So the squelch is not working and its backwards. Any help would be awsome. Also I cannot set the bias...

Yes I was wondering the proper way to tune my amplifier I have a varmint XL 600 tube type 2 driving 4 it has a trimmer on the back and one inside the box also.