Search results

I'll be getting one. I like the look of it. I have always preferred Yaesu over Icom. Dual RX will hopefully allow for duplex satellite work. I have an IC-705, X6100, and an FT-817ND already but you can't have too many QRP rigs. :) Hopefully it doesn't suffer from the horrendous LCD touch screen...

The ARES 2 might get an update in the future, but it won't be for a while. It might look something like the ARES VI concept, but it could also include the TFT display as used in the AT-900PRO. There will be more TFT screen use in models like this going forward. ARES VI Concept thread...

It's impossible for us to know/guess exactly what you changed, (if anything at all). If the radio is working well for you, with no specific issue you can see, then that is all that matters. Enjoy the rig and keep out of that menu! If you choose to send if off to someone to check it over /...

FYI, I renamed the band "I" to "-R". That way, when you TX using repeater offset, the screen goes from "10" to "-R" (for - repeater offset). It s a great little rig for 10m FM. 73

It's not far away now. The main delay has been with getting the programming software to work correctly with the new memory logic in the firmware (not a simple thing). It's a great update, I'm sure most people will like what it adds. 73

This is not a QX made radio.

It is not QX made, but regardless it looks interesting! I hope the quality will be there when it is released, and the price sensible. It is tiny... significantly smaller than any other 10m SSB radio on the market. (There is a Youtube video of someone holding it in one hand, and his hand was...

Thats awesome. I think 10m SSB on a handheld is the most fun you can have with your pants on. hihi (y) 73

Yes, your cables will work fine! 73

I already have a few of these awesome radios, so I won't enter the contest. Someone else should win it! Thanks to Radioddity and WWDX for making this happen. Good luck everyone! 73

I just had a closer look at your photos - the board is very clearly marked! You should be good to go, just take your time and use the right tools - don't break any of the slugs! 73

OK, I would reference the document attached as a guide only. Regarding the clarifier not functioning on AM/FM mode - you need to align the radio in SSB mode. Inject a 1KHz tone into microphone and if you are in LSB mode, you will see a TX frequency -1KHz lower than the VFO frequency. If you are...

It's been a while since I worked one of these, but from memory it might not be that simple... If it's like the earlier Albrecht/Dragon (SY) designs, it would have a can for each of the 1KHz steps, between 1-5KHz, which are used to achieve each division in the VFO step range... Meaning that the...

Is it a long case or new short case version radio?

What happens when you lower the TB volume?

Do you have another radio turned on in the shack, monitoring? We have had similar questions before, and in these cases it has ended up being only the TX and RX processing delays, causing the "echo" sound when monitoring your own audio with different RX sources. These radios run the audio via DSP...

All good - hopefully that has solved your issue. 73

After selecting "HF.BAND", did you Press and HOLD the FUNC key?

QRP portable operation (5 watts or less) is life here! For whatever reason, small low power portable radios have always been addictive for me. Nothing beats making contacts with battery power, a piece of wire or a telescopic whip :) These are some of the HF QRP rigs that I use semi-regularly (I...

It's such a basic VFO that there might not be much that is worth stealing! hihi. My modified .ino is attached. The code is for this style of DDS VFO: https://www.ebay.com/itm/296637034430?mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5336136228&customid=&toolid=10001&mkevt=1