Search results

What do you call a VERY large triple-gang potentiometer? A "triple-potamus".

You should be ok with just one more 1.5v battery, but I wouldn't recommend any more than that.

Simple adjustment should take care of the issue, but occasionally you will run into drivers with the actual meter drive circuit (failed diode or capacitor, out-of-spec part value, etc). You can often give the meter a bit more room for upwards movement by using a bit larger filter cap in the...

It is an intriguing idea, but I've never seen a kit for that personally, and to do the swap would likely require some frequency juggling. The typical MC145106 chassis (Galaxy, Connex, etc) uses different loop oscillator and VCO frequencies. You photo shows what appears to be an extra crystal...

The output impedance of the 5351 is 50 ohms, with drive levels up to 8mA. Should be enough for any oscillator/crystal replacement needs you have. For a more involved coding example than the samples provided with the Etherkit library, you can download the code I wrote for my key-pad-controlled...

I've never had any issues storing these things out in the open. They are NOT that delicate, lol! As long as you don't expose them to anything more than normal humidity, I doubt you would ever have any issue at all. As for drift, I've used these in a number of projects, and I've not had any...

The general installation manual from the DDS-VFO website's help page covers how to set up CLK1 for a fixed frequency. CLK2 doesn't seem to be available in the DDS-VFO menu, but since the 5351 uses I2C for communication with the kit's Arduino Nano, you could probably install and connect a 2nd...

The radio in question uses a double-side board. It may not be a simple fix in this case, as a board via may have been damaged as well. Would you be able to take a close-up photo or two of the damaged area? Might help with coming up with a solution.

What trouble-shooting have you already done?

I'm currently using an ancient Turner handmic that was supposedly based on a Shure, but the model is obscured and I have no idea what Shure model it was supposed to be based on.

Be thankful they were DEAD! I opened up a Cobra 29 LTD Classic about 20 years ago that was FULL of LIVE roaches. It was just like a scene from a horror movie. Roaches scurrying across the bench, across my lap, up the cabling, down my legs, and in all directions across the floor. Needless to say...

Great post on the details of that RCI case! I remember when that was a big topic of phone conversations with Galaxy and a few distributors at the time. RCI IS repacking some of the old tech while introducing new models. The problem with RCI is still build quality. I continue to see new Ranger...

MSRP in the US will be in the ballpark of $270.00 - $300.00, with dealer cost approaching the $200.00 ballpark. One popular US distributor called me a couple days ago asking my opinion as to whether they should start carrying it, and I had to say no. Not sure this one will catch on very well at...

The part to which Doffo is referring is the AM voltage regulator. Based on the fact that you are seeing proper voltages on the driver/final collectors, and the fact that you do hear the transmit on a nearby radio, I do not think there is an issue with the AM regulator. This is beginning to sound...

I know this is an ancient thread, but there's an HR2600 listing on Ebay for those interested.

Something fairy major had to have happened, but no excuse for not returning customers' radios, fixed or not. I'm going to try to connect with him via QRZ or maybe bump into him on 2 meters, and see if I can find anything out.

Has anyone heard from Mike? I know he's alive and well from his QRZ page.

One other broad-banding trick is to put a 200-ohm resistor across pins 11 and 13 of the SO-42P TX mixer IC. I think those are the correct pins, I'm not at the shop to check my notes. I know its two pins near the connection for L47.

The may seem simplistic, but with the RCI build quality issues lately, look for bad solder joints in the output tank circuit. I've seen a few of these come through that were basically brand new with tank circuit coil connection failures. Any breakdown in the tank could cause the problems you're...

I'll add one more observation to the thread. Many newer exports have separate AM and FM carrier levels. As had been pointed out already, you should use the same carrier level on FM as on AM to avoid releasing the magic smoke.