Search results

You know how on the FT-101e when you want to tune the radio or an amp, you would switch to CW for a steady carrier I'm having brain fart on my new to me icom 746 non-pro when I put tit on CW no carrier is produce I would have to use audio or whistle on ssb There's got to be another way

by any chance you know the name of the group or link to fb page

Has anyone here owned or currently own an Ameritron AL-811H? If so, have you performed the internal fan and bias correction as suggested by W8JI? Which bias setting did you use: low, medium, or high? Additionally, did you set the fan speed to low or high? I primarily engage in rag-chew on SSB.

i saw 8-11 on mine i thought either the transformer was swapped out on that date

Does anyone here know how to decipher the serial number from Ameritron AL-811H to see when it was built serial number=AL-811H-24294

i have an Autek research WM-1 meter. I'm trying to do the quick alignment as described in the manual I included an image Am I reading it right using a 50-ohm dummy load, set the SWR to 1.1 ??? Also, I've noticed that when on the 2000 scale, the SWR doesn't register only on 20 and 200, and when...

Yes i found a heavy-duty 90-degree RCA cable it's working radio is keying the amp thanks for the replies

I'm selling as a package to pay for my other amp. I'm looking to buy. when i bought the amp, the guy sold me the extra tubes separately

i assume you key both at the same time or radio then amp my othe amps didn't need anything extra to make them key

My thinking was at 1000, i meant instead of using both if I can just use the send

For sale: Palomar 300A in good working order. I was using it on 20 and 10 meters. On the low side, it includes 8 extra tubes at 85% to 90%. Asking $325.00 plus shipping or local pickup in FL.

I'm picking up an Ameritron AL-811H, and I'm using an Icom IC-746 nonpro if I don't use the alc port, can i use the send RCA from the radio to amp relay port to key the amp ?? or would i need a foot switch for the amp

I have a DVS-2 voice recorder for Yaesu radio in good working conditions, upgraded from the FT-890 to Icom 746, no longer needed asking $125.00 plus the ride

Looking for these filters Icom FL-96 2.8khz SSB filter (455khz center -6dB FL-103Filter 2.8 kHz SSB (9 MHz IF)

i have a complete one minus the cable, it does work, the housing needs attention I I have a working one. $60.00 for the one with out the cable and $130.00 for the complete one plus shipping I also have a tug-8 amplified with a spare head for $80.00 plus the ride

i have a tug 8 with an extra working head only issue is i won't be back home until mid april

ok, i use a .01 cap, which seems to help lower some bass but to me, it almost has like a tad of nasally sound.

will give that a try later on thanks nomad

I recently picked up a Heil MH-12 Genesis mic with a 4-pin connector, and I'm trying to use it with my FT-890. The only adjustment I could make on my radio is pressing Fast + USB to reduce some of the bass, but the mic still lacks treble. I remember an old trick for CB mics where you take a .01...

i found this page for an astatic D104 desk mic with every radio possible out here wiring=https://www.qsl.net/g4wpw/astaticbook.pdf?fbclid=IwY2xjawFp9rhleHRuA2FlbQIxMQABHUG_WY3SqbTCtUbS5dJVjMhRz9tjMsVudsjcwIZ98VuMXK8D_TFa-igMfQ_aem_TiOfk3HnDJFh4WUH09KHEw