Search results

i think I need to go up in height that's 3 feet off the ground

quick question on an EFHW wire if the SWR is lowest in the lower band but you use a bid higher freq example 7.015 to 7.120 SWR 1.2 I rag-chew from 7.165 to 7.250 SWR 1.9 do I shorten it or length it? also only using 40,20 and 15 meters do I tune on 20 meters so the 2 other bands come down or do...

I got a chance to check at tp1009 according to the service manual and the freq checks good there. don't understand why the digital display shows off

Thanks, guys for the guidance i just want it, for alignment nothing else especially my yaesu ft-890

can I use this to check the frequency of tp-1 on cobra 2000 gtl ??? if not a good inexpensive recommendation thanks https://www.ebay.com/itm/335294924411?mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5336136228&customid=&toolid=10001&mkevt=1

yes

Not bad thanks for the info i sent my to a amp builder in the NE he is going to re-do the 40 and 20-meter band with the correct setting and fix the low side input trimmer with a pot in the back of amp so every time the band is switched simple to adjust

Thanks

poinciana fl which is part of kissimmee fl 34758

Does anybody know where or someone close to me here in FL to check 8 tubes for me I don't want to buy a tester just to test 8 tubes or a trusted place to get them checked when I got them with the Palomar 300a 6lf6 they have a piece of tape some say 95% others say 87% in case I do decide to...

i have a chance to buy this amp=Heathkit HA-10 Warrior 1kW I know it's from the 70s but in good condition is it a clean amp or splatter box even if you don't over-drive it ?? Compared to my Palomar 300A It's already modified to use with today's modern radios the guy said

thanks took the test june 11 and pass only 4 wrong

channel 9 has become the local Spanish channel for PR and beyond they are using it as their Super Bowl channels base station key downs just about everytime there is skip

why it seem that a 40-10 EFHW 56.1 is a tad harder to tune compared to the same antenna except with a 49.1 transformer I can tune it in under 5 minutes .1.3 SWR on 40,20,15 meters the 56.1 I'm still trying to fine-tune the best I get is 40,20 meters swr 1.5

Sold

well hard work paid off only 4 wrong all for just an extra 10 more channels LOL

well tomorrow morning i test for extra. It was a challenge all that reading but well worth it

4 sale 2 bird 43 slugs element sold the meter no longer need them $125. for the 250-watt and $145 for the 1000-watt plus shipping

thanks

isn't that what being a ham is all about building modifying breaking it fixing it again I have no use for it on the CB band where I live if you don't have 5000 watts for a driver you just be watching your CB like a sony tv