Search results

D104-M6 Minuteman II

Dan, the SAMS man, comes through again!!! Thank you!

Another, that came to mind, that isn't too common in the US, is Yupiteru. Also very good.

Dan, do you ave CB-71? Looking for the Midland 13-796.

It looks like R19, is tied to the base of the keying transistor. Not the best photo, not too revealing. I would try a 220 ohm there.

If you want to try cheap, the Quansheng K5's and K6's, will do this with a custom firmware. The KD8CTC FW, can actually TX on SSB (actually DSB). My K5(8), does have 200mW out on 220. Will demod SSB. I am using the Egzumer FW.

AOR, Icom IC-Rx, some scanners work at that range that are pretty good. I use a Kenwood TH-F6A for an application like that, which requires SSB demod at 220 MHz.

There are several versions of that radio. You need to be specific, with the model number and suffix. 674, 674A, 674B. If you don't want the Midland 79-892, let me know. Mine has been dead for decades and I miss it. It became a parts donor a long time ago. I put a DDS VFO on my 674B last winter...

My first thought, is the NTE devices are crap.

I highly recommend NOT using xtal. The few experiments I have performed with the 5351's, the TCXO became mandatory for stability. The 5351's I have, came populated with xtal. So, I got some TCXO's that will replace them.

I have been wrapped up in antennas and other things lately. I would like to contribute to this, but I don't have the bandwidth yet. I have an Agilent SA here, in addition to several others. But my 2 Aeroflex CSM's are down now. I have a couple of Rigol's, but I don't like them that much. They...

Rather than start a public debate, I'll message you.

I have used all of the variants. Repaired all of the variants. Tested all of the variants. The current Imax is trash. The old Imax is old. The Maco is not going to fall apart within 18 months, as an Imax will and won't have RF on the coax shield. There is better than a Maco out there, but if I...

Measure the signal level at the input of the counter.

You are still blabbering, about a DEALER, supporting a radio that they didn't make. When your Icom radio is not doing what you *think* it should, who do you contact for support? The dealer that sold you the radio that Icom made? Or do you contact Icom support? I know who I would be reaching out...

There is no magic here. The 5.6V Zener should have worked. I would use a 1 watt part, rather than the .5W the factory used.

Hello, I am looking for the Dyna-Com 3B pages from CB-46. I didn't find it posted. Thanks

Wanted Lafayette Comstat 25B Late Version Manual/Schematic/ Block Diagram/ Voltage chart/Alignment. There are two versions, early,uses 6AQ5 AF amp, 6AN8 RX OSC. The Late version uses, 6BQ5 AF amp and 6BL8 RX OSC. The SAMS I have, covers the early version radio, which, is not providing the info...

I don't remember what the Clipperton L, or SB-220 uses. If it that series switch, you have your answer.

I have a bunch of 5351's, only one is adafruit. I have put my DDS projects on the back burner, probably till winter. I probably have some fakes too. I need to look at them more closely.