Search results

I think this is absolutely the best group of people on this site. I have learned so much from the information posted here. Thanks to all that have helped me iron out issues with my equipment. Wishing everyone a safe and happy Holiday season!

Congrats and enjoy!

I have a RCI 2990 that when it is in USB mode the noise level signal is about 3 s units higher on the meter than when in AM/FM/LSB mode on any frequency. From everything I have read the noise level signal reading for LSB and USB should be fairly close so I am assuming there is something up with...

I understand the rules and wish to enter the contest.

I should have just included the pictures in the original post. I need pictures like these of the component and trace side of the main circuit board of an Original/First Gen RCI 2970. Trying to connect the amp section back to the main board and want to verify where the smaller red and black...

Needing someone with an Original RCI 2970 that can help me with some physical wiring/circuit comparisons. I am working on reassembling one and need to verify 100% where the smaller red and black wires from the amp connect to the radios main circuit board. Needing pictures of both the...

That is called CircuitTrace a feature of Sams service manuals and yes they are connected at where the number is shown on the schematic.

I've taken the clock motor apart and found one of the plastic gears had broken causing the "gearbox" to slip when attempting to turn the number dial. Couldn't fix the broken gear and found nothing when searching for a replacement motor or gear.

Here are the Voltages for the MB8719 PLL on Channel 19 Pin 1 - 3.4v Pin 2 - 4.28v Pin 3 - 5.15v Pin 4 - 3.44v Pin 5 - 3.44v Pin 6 - 8.09v Pin 7 - 0v Pin 8 - 4.45v Pin 9 - 8.05v Pin 10 - 8.05v Pin 11 - 8.05v Pin 12 - 0v Pin 13 - 0v Pin 14 - 8.05v Pin 15 - 0v Pin 16 - 8.05v Pin 17 - 3.65v Pin 18 -...

Here is what the board should look like without the channel mod.

I had 3 non working 2510's. One of which was in a fire and the front bezel was melted into a big plastic glob. So that one is my "donor" and I have already pulled all the parts that are still usable, bagged them up and put away till needed. Of the remaining two one is repaired/restored and...

I understand the rules and wish to enter the contest www.worldwidedx.com/threads/what-year-and-why-did-you-get-into-the-radio-hobby.270244/post-861449

It was 1976. I was in the 7th grade and begging for a CB radio as "everyone who was anyone" had one. Dad brought me home a 3 channel Midland. Nothing but a volume control, a squelch and a 3 position channel switch with a mobile antenna mounted on the gutter. Wasn't much but I was able to talk to...