• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Search results

  1. D

    D104 down

    It worked ET.
  2. D

    Turner JM+3 mic

    Excuse me, it's Electronic switching.
  3. D

    Turner JM+3 mic

    Great mic! Here's the little secret, it's relay-switching. It also sometimes squeels. To cure this simply put a 47K,1/4 or 1/2 watt resistorbetween the audio line(White) and it's connection inside the mic.and a .001 cap from the audio connection to ground. pinout is as follows; White is audio...
  4. D

    Wizardry!

    In my defense; Did not cut traces at Pll(AAMOF I repaired the one he erroneously cut at pin 12), did not cut trace at vr10, l3,loop mixer, did not change xtal, or wire channels incorrectly. Also, the ETs credit he straightened out the freq. L s that the Hillbilly Tech messed up when he started...
  5. D

    d104 potentiometer HELP

    All D104 Desk mics with the exception of the G-Stand and the UG stand, have a volume pot.
  6. D

    BEST PRODUCT FOR SCRATCHY VOLUME KNOBS ECT

    OP, go to the nearest O'Rielly's auto parts, and buy a can of CRC Electronic cleaner, I use it.Works great. Had a dodgy mic gain control on my 2000, fixed it right up with this stuff.
  7. D

    PROPER WAY TO CHECK SWR WHILE USING AN AMP?

    Radio to Amp to Meter to antenna, always check the SWR with the Amp off.
  8. D

    D104 down

    Guys, I need a volume pot out of either a TUG-8, TUG-9 or TUP-9 D104, anybody got a junker D104 you can pull one out for me?
  9. D

    NEEDED CLEAR READABLE SCHEMATICS FOR TRC-459

    Excuse me Gentlemen, but if you change the X2 Crystal to a value of 18.3375 it will extend upper coverage to 28.045mhz. http://www.cbtricks.com/pub/secret_cb/vol_10/graphics/secret_cb_vol_10_pg32_35.pdf , page 35.
  10. D

    Wizardry!

    Don't know if this is the right sub-forum or not. If not Robb, please move it. I'm gonna talk here, about myself and another. I'm coming back into the hobby after a hiatus of fifteen years. In those fifteen years I calculate I've lost about fifty percent of what I knew. The more I work with...
  11. D

    MODIFYING SBE Console 6 for channels - best method ?

    Great ET, do you mind if I put that in my notes?
  12. D

    Removing a variable AM output from a 142GTL

    Okay, got the recap finished. Here's where it's at. I have some receive, a red key light when I try to Xmit but, no AM or SSB Xmit. That should mean there's nothing wrong with the frequency creating or the PLL. If the freq. were off I wouldn't get the red light on keyup right? I'll check the...
  13. D

    MODIFYING SBE Console 6 for channels - best method ?

    Retro, be careful. That's one very-rare chip!
  14. D

    MODIFYING SBE Console 6 for channels - best method ?

    PLL Modification PLL Used: NDC40013/M58476 Models include:- Craig L131/L231, Johnson Messenger 4730/Viking 4740, NDI PC200/PC201, Tram D64, Pace 1000BC/1000MC/SS-120, SBE Console VI This chip was designed to replace the MC14526/68 pair. Used in SSB models only. Modification is done by useing...
  15. D

    New Eagle Tomahawk....mic wiring help.

    Hmmm,got that wiring pinout from their site and my Mic wiring book jived with it. Reverse red and blue. I'll note that in my book. Thank you!!
  16. D

    New Eagle Tomahawk....mic wiring help.

    Good! glad to of some help to one on here finally!
  17. D

    What's your favorite 'vintage' CB rig?

    Adding to the GrantXL(Everything else is somewhat below the Grant's capabilities) Uniden Washington Base Cobra 2000GTL Cobra 148GTL SBE Console V Tram D201A Not in any particular order.
  18. D

    MIC WIRING TURNER PLUS 2 TO GE 35875A

    This is for the SSB+2 1-White 2-Shield 3- Red 4-Black
  19. D

    MIC WIRING TURNER PLUS 2 TO GE 35875A

    First, is it a Turner M+2 hand mic or, a Turner +2 Desk mic? They get wired differently.