• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Search results

  1. thumper937

    30k puck

    yeah i had no issues at all with my 10k on the roof. i actually ran one of the bolts threw the crossmember in the roof with my old truck and plan on doing it the same way with this truck. and adding sound deadener on the inside of the roof as well my 10k got a little loud at 65+ mph. im hoping...
  2. thumper937

    30k puck

    Anyone puck mounted a predator 30k w/17" shaft? I plan on using a breeslove. 3" puck and 6x6 backing plate. Just wondering what kind of flex anyone has seen with a 30k i had a 10k w/17" shaft on my old pickup truck. With zero flex on the roof.
  3. thumper937

    HELP!!!!!!!!!!! B&K 1040 cb servicemaster

    does anyone have a copy of the b&k 1040 service manual, parts list, or schematics for this unit or just able to tell me the value of 2 parts R34 and not sure on the other parts location number but its at the junction of R95 see the picture it rides right next to the coil. thanks 491
  4. thumper937

    Rci 2995dx no tx

    Okay I probed it while in rx mode I have 7.71v on both ends tx mode I have 7.62v on one end and 0.08v on the other end
  5. thumper937

    Rci 2995dx no tx

    Someone did replace the driver before I got the radio. I know this because all the other 520s were stamped 520 this one wasn't. I replaced both the driver and final with brand new 520s to rule that out from the start. How can a guy check L29 for resistance?
  6. thumper937

    Rci 2995dx no tx

    I pulled the jumper inside the radio going to the so239 and plugged it into the main board completely bypassing the amp board. Factory jumper is now going from main board to s0239. I have the rci going into a bird 43 then into a dummy load I can hear the rci on another radio that's on my bench...
  7. thumper937

    Rci 2995dx no tx

    The amp is completely unhooked from the radio that's one of the first things I did just in case there was a problem with the amp that would cause it not to let the tx power past the amp.
  8. thumper937

    Rci 2995dx no tx

    Even if bias wasn't right I should still have some watts comming out of the radio
  9. thumper937

    Need Service Manual for ARF2001 Base Station

    I have about 3/4 of it forgot what,page it ends on
  10. thumper937

    Rci 2995dx no tx

    I've got a 2995dx has no tx output rx works fine I also unhooked the amp board completely to rule.that out and hook coax from.s0239 directly to main board. I can't find any voltage info on this radio and the schematic on cb tricks uses bipolar finals so I would assume voltages would be different...
  11. thumper937

    antenna project pdl-II made into a quagi please help antenna qurus!

    Anyone ever come up with measurements as far as were to place directional elements and lengths ? I'll be running it on 11meters