• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

10 meter Tech priviledges?

fasteddy

Active Member
Apr 5, 2005
377
2
26
I was told that there is small portion of 10 meters that Tech lisencee's could do phone operations on. 28.305 - 28.500, is thisright or did I get some bad info. Want to be sure before I do something stupid<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/roll.gif ALT=":rollin"> <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/embarassed.gif ALT=":o"> .

Thanks

fasteddy<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/smile.gif ALT=":)">


fasteddysig.gif


</p>
 

FastEddy,

The 'new' Technician license doesn't have any 10 meter

priviledges at all. The 'old' 'Tech-Plus' had the same as

the old Novice license, 28.300 to 28.500 Mhz (?) phone.

- 'Doc



PS - Maybe after the ITU conference, but not now.






</p>Edited by: <A HREF=http://pub86.ezboard.com/bworldwidecbradioclub.showUserPublicProfile?gid=w5lz>W5LZ</A> at: 5/15/03 7:14:28 pm
 
Thanks guys, you all are a big help. I know I sound a little ignorant, but I just wanted to make sure.

Take care

fasteddy<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/smile.gif ALT=":)">


fasteddysig.gif


</p>
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.