• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

40 Meter MOON BOUNCE? I hardly doubt it.


He is an idiot looking for attention. The only reflectors left on the moon AFAIK are laser reflectors for measurement purposes. 40m will not make it to the moon and back due to absorbtion and reflection. It sounds more like a long delayed echo which happens fairly often somtime somewhere to someone.
 
He is an idiot looking for attention. The only reflectors left on the moon AFAIK are laser reflectors for measurement purposes. 40m will not make it to the moon and back due to absorbtion and reflection. It sounds more like a long delayed echo which happens fairly often somtime somewhere to someone.

The three S's. I like that Sometime, Somewhere, Someone.
 
QRZ had a discussion about this [slash]achievement[/slash] claim.

http://forums.qrz.com/showthread.php?292862-EME-Moon-Bounce-on-40-meters


Now the dolt is saying that all signals were 59 on an EME on 40m. :laugh:

I liked this post on QRZ about the issue.

"The High-frequency Active Auroral Research Project (HAARP) folks did an EME test in January 2008 on 6.792 MHz CW.

However, they were using 3.6 MEGAwatts and 180 turnstile antennas :-)"

And this guy claims EME with at most 1500 watts SSB and very modest low gain antennas.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.