• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Ameritron AL 80B 10 meter mod.


Behind the band selector knob on the inside of the front panel is an enclosure under an inch thick. It contains the tuned-input circuit for each band. A green wire snakes out from a hole in the compartment's side, soldered to a ground lug. Cutting this wire will activate the 10-meter input circuit and make the "blank" band work.

73
 
Behind the band selector knob on the inside of the front panel is an enclosure under an inch thick. It contains the tuned-input circuit for each band. A green wire snakes out from a hole in the compartment's side, soldered to a ground lug. Cutting this wire will activate the 10-meter input circuit and make the "blank" band work.

73
I always thought you had to buy a ten meter board/module or something to get ameritrons online on 10/11. Is that just certain models?
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.