Any advice on a Rodek RA2150? Caps died

[357]

I have the RA2150 and am doing a recap.

should I do anything to "update" it.

I plan on doing all the caps, I have no schematic.


Taking the lead spacing and height limit of the big caps, here's what I plan on getting to replace these:


Small
https://www.digikey.ca/product-detail/en/UHV1V470MDD/493-15312-ND/2598282/?itemSeq=272560921
https://www.digikey.ca/product-detail/en/USR1V100MDD1TP/493-16005-1-ND/6556043/?itemSeq=272560959
https://www.digikey.ca/product-detail/en/USV1H010MFD/493-14516-ND/2539283/?itemSeq=272560968
https://www.digikey.ca/product-detail/en/10ZLQ220MEFC5X11/1189-3611-ND/6049816/?itemSeq=272561108

Big
https://www.digikey.ca/product-detail/en/nichicon/UPW1H222MHD/493-1923-ND/589664
https://www.digikey.ca/product-detail/en/nichicon/UPW1E272MHD/493-1840-ND/589581

Should I just stick with factory values on the big caps?


Also the thermal insulation seems to be paper....not sure what to do there either.

thanks

 

[357]