http://www.w7ekb.com/glowbugs/Military/PDF files/Surplus/Surplus_radio_conversion_manual_vol1.pdf
This manual contains INFO on power supply mods and other info !!!
This manual contains INFO on power supply mods and other info !!!
It's not too bad as long as they let you have hot water. Eating dry is not fun!I like ramen noodles
It had 120v transformer inside 250v secondaryhttp://www.w7ekb.com/glowbugs/Military/PDF files/Surplus/Surplus_radio_conversion_manual_vol1.pdf
This manual contains INFO on power supply mods and other info !!!
It could be loaded with toxic chemicals! PCB was used quite often in transformers and capacitors. Polychlorinated biphenyls are in a lot of old equipment.I saw a video of a guy replacing six caps that are sealed in tin box with oil that's could be nasty and flammable. Man it cool
The best exposure to toxic chemicals is NONE!So I need to find the right way to remove the old caps,maybe gloves and a fan? He took a saber saw and cut top of can containing cap right at the end. He wasn't wearing protection but he may be dead now too so I need to be carefull.
Look for ones where the oil is not released.Can caps be changed another way? He could be showing a lazy mans way I use google and you tube a lot but sometimes people post a stupid way to do something so from those sources I try to look at a few different ones till makesnse me
AM/CW SSB (BFO)
1.5 - 18 MHz...160 meters thru 17 meters
The BC-312 is a rugged and uncomplicated receiver to work on, but sometimes you get problems with the mechanical dynamotor (works like a motor with a mechanically coupled alternator) and many sets have been modified to mains operation with an external mains power supply bypassing the dynamotor.
The BC-312 is intended to be powered from a car battery from 12 - 14 V DC, the high tension(voltage) is generated by a rotary converter, a so-called "Dynamotor".