-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Bias for old Tube Amp
- Thread starter Lazybones1222
- Start date
J
jjohnson
Guest
Re: Bias for old Tube Radio
i think well actually i know it's class bleed/alot
lol
Lazybones1222 said:
i think well actually i know it's class bleed/alot
lol
I am going to give you "the deal" on class of operation when in comes to tubes.
AM and SSB signal reproduction must be linear; RF amplifier tubes are run class AB1 or class AB2 which produces linear output signal.
Tubes in "Always on" service such as RADAR are ran in class A.
Tubes used in Telegraphy service (on and off only when linearity is not important because there is no speech) are ran in class C.
Audio modulator circuits are usually ran in push-pull configuration and are in class B service.
.
AM and SSB signal reproduction must be linear; RF amplifier tubes are run class AB1 or class AB2 which produces linear output signal.
Tubes in "Always on" service such as RADAR are ran in class A.
Tubes used in Telegraphy service (on and off only when linearity is not important because there is no speech) are ran in class C.
Audio modulator circuits are usually ran in push-pull configuration and are in class B service.
.