I have a gray 300 plastic switches when I key my cobra it clicks really fast. If I turn down my power Mike to 0 it stops but none can hear my transmission. Any advise?
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Clicking amplifier
- Thread starter Hammer head
- Start date
What kind of power supply are you using? Sounds like either the power supply is too small, or the amplifier has a fault that overloads the power supply.
Of course, if the input and output connections on the back of the amplifier are reversed, with the radio cable on the antenna socket and the antenna on the radio socket, you'll see just this symptom.
More than one way to make it act like this. More than 3, really.
73
Of course, if the input and output connections on the back of the amplifier are reversed, with the radio cable on the antenna socket and the antenna on the radio socket, you'll see just this symptom.
More than one way to make it act like this. More than 3, really.
73
I checked the amplifier power supply connection. Turns out it were and issue near the hot wire connection to.the battery terminal. The post were slightly lose. I tightening it. Now it when I key the mic the amp no longer makes the clicking or shuddering noise. Thanks for your help sir.
Insee.on your profile your in Louisville. London ky here. Near the tenn boarder. Peace out sir
