• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Cobra 200 *Owners What Size Power Supply Amps*

  • Thread starter Thread starter drifter8291
  • Start date Start date
D

drifter8291

Guest
I have a question to everyone who owns a cobra 200. What size power supply are you all running? How many amps? Thanks
 

4+ amp home-brew, and it has half a dozen radios running off of it at the same time. They are only in receive mode, however. I use the supply to keep all of my showcase radios lit up. It enhances any "COOL!!!" factors.

When I test 200's (or any other radio), I use a Powertec 60+ amp switching supply with #6 main cable feed, and doubled #14 for the 200 power cord setup.
 
I think somewhere around 10 would be close, give or take. I guess I should say that I've never actually looked the the dead-key pull of a 200 running at about 30-40 watts key, so I'm basing what I'm saying here on general 2-pill amp characteristics.
 
a 20 amp power supply will run a 200 just fine radio will pull 18 to 20 amps full power :D
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.