Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Cobra 29ltd/gtl and radios that use the same board ?

T

Techno1

Active Member
Feb 21, 2022
141
39
38
48
New Hampshire
On the Cobra 29 ltd/gtl and the Dwight D and cobra 1000.

Is there a location on the pc board to monitor the frequency with a freq counter.

I know on the Cobra 142/Madisons/Washington and radios that use the MB8719/8735 pll TP 1 which is a resistor on 1 side is a good place to monitor the frequency. Is there a point on the AM radios mentioned above to do this?

thanks
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom