• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!

Courier Centurion 40D

HomerBB

Sr. Member
Jan 4, 2009
3,982
2,742
273
69
Rogers, Ar
Does this radio require the mic being plugged in to have ears, and does anyone know the wiring requirements inside a D104 deck mic for it?

It also has a Digi-Scan with which I am not familiar.

Cen40D01.jpg


I see the question about the mic wiring was asked/answered here - http://www.worldwidedx.com/general-cb-services-discussion/33566-courier-centurion-40d-mike-help.html -, but i want to work in the microphone end. I'll try to detemine it on my own (the mic is currently wired for a Siltronix radio), and see how I do.
 
Last edited:
  • Like
Reactions: bobl9355

Homer -

This radio is a keeper. A special 858 ssb chassis built just for Courier. Doesn't need a mic plugged in to receive. If speaker is ok, check the relay contacts, as this is a common "no receive" fault with this set. Does it key up and transmit ? If it does, this eliminates a lot of possibilities. good luck. 73s

- 399
 
Take a 1/4 Headphone/Stereo jack and plug it in and wiggle to make sure the contact on the "PHONE" is working for receive it is the only way it would have no ears under easy testing.

I Might have the sams for it I will look.
 

dxChat
Help Users
  • No one is chatting at the moment.