I am about at wits end. I have ordered coax with terminal ring connectors and both times the coax was unusable.
What I need is 18 foot RG8X polyvinyl with one end PL259 and the other end two ring terminal. This will mount to a Predator mount with terminal fitting.
I have tried my self to make and just do not have all the necessary equipment. Good soldering gun and shrink tube, and good coax.
Any recommendations on whom to contact for this work.
Please do not recommended the "predatordiscount10Kantenna" site. This guys coax is a joke!
Kale Carvel is nice enough to make me some up, to replace the poor job the above site mentioned did.
I still would like another contact so I do not have to lean on Kale, after all he is a antenna maker not coax.
As you know Kale makes the Predator 1OK antennas but has nothing to do with the site or coax being assembled.
I unsdertand that John is Kale's main distributor and he has a site too. Both the sites look the same other than John's name.
Looking for a quality assembly job with ring to match the Predator mount, and a ground braid smaller ring.
Information will be greatly appreciated!!
What I need is 18 foot RG8X polyvinyl with one end PL259 and the other end two ring terminal. This will mount to a Predator mount with terminal fitting.
I have tried my self to make and just do not have all the necessary equipment. Good soldering gun and shrink tube, and good coax.
Any recommendations on whom to contact for this work.
Please do not recommended the "predatordiscount10Kantenna" site. This guys coax is a joke!
Kale Carvel is nice enough to make me some up, to replace the poor job the above site mentioned did.
I still would like another contact so I do not have to lean on Kale, after all he is a antenna maker not coax.
As you know Kale makes the Predator 1OK antennas but has nothing to do with the site or coax being assembled.
I unsdertand that John is Kale's main distributor and he has a site too. Both the sites look the same other than John's name.
Looking for a quality assembly job with ring to match the Predator mount, and a ground braid smaller ring.
Information will be greatly appreciated!!