You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Click here to find out how to win free radios from Retevis!
I got a Phantom on a trade yesterday and it has no high power. Works fine on low but wont do high power. It puts out the same on high as it does on low...
I got a Phantom on a trade yesterday and it has no high power. Works fine on low but wont do high power. It puts out the same on high as it does on low...
I know about working with amps and high voltage. Ive been messing around with this stuff for 20 years.. Just looking for someone to give me a few hints.
If you been working on them for 20 yrs then you know D&A switches the input from the driver stage to the final stage for hi low output.
If it does not have two stages functioning then it is either the hi/low switch. or the relay or associated circuitry. I,E. voltage for relay,
I think they are 110vdc relays, going from memory.
the above link is to CB tricks site, with 20 years experience I am sure the schezio will help you figure out your problem.
When any member asks for assistance on working on an amplifier it is considered a good practice to always include safety with working high voltages than can be lethal.
It does not matter how many years experience you have, it only takes one mistake and you may not have any more years of experience.
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.