• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

davemade transistor conversion

coyotekid28

Member
Jun 17, 2013
22
4
13
Purchased a davemade m200 which is supposed to be 1 2sc2290 driving 2 2sc2879's and it has a different set up . It is set up 1 Motorola 3800 9126 driving 2 2sc2879's any ideas on that Motorola transistor just curious amp does what the specs state it should . thanks
 

I realize you are a newcomer here but expecting an answer in less than a hour and a half after asking is expecting a little much. Sometimes you hit it right and get an answer in minutes if the right person is online and other times it may take a day or more.
 
Yep and that's my bad I told a few others I was sorry and was actually using my phone and didn't realize it had posted I got it figured out my apologies cheers
 
Purchased a davemade m200 which is supposed to be 1 2sc2290 driving 2 2sc2879's and it has a different set up . It is set up 1 Motorola 3800 9126 driving 2 2sc2879's any ideas on that Motorola transistor just curious amp does what the specs state it should . thanks


If the amp is swinging 400 watts peak, don't worry about it. As readily available as 2290s are, it's puzzling why someone would put a different driver pill in there.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.