Delta M2 Mic audio

[Cookie55]

Just got a new Delta M2 mic and noticed the audio takes about 1/2 second to start after the push to talk button has been pushed. As long as you remember to wait just a bit the mic has good audio but if you don't wait you'll loose the first few words on your transmission. Any one else noticed this issue with these mics?

 

[AmericanEagle575]

Just got a new Delta M2 mic and noticed the audio takes about 1/2 second to start after the push to talk button has been pushed. As long as you remember to wait just a bit the mic has good audio but if you don't wait you'll loose the first few words on your transmission. Any one else noticed this issue with these mics?

Same on this end,other than that it's been a great sounding Mic hooked up to my Ranger 2995,Solid built I feel,jmo......

 

[Cookie55]

Same on this end,other than that it's been a great sounding Mic hooked up to my Ranger 2995,Solid built I feel,jmo......

Ok at least I know it's not just my imagination. I get good reports on the audio too. Guess it's like waiting for the ping to finish on a Browning.

 

[Kristopher burt]

I have heard this mic over the air on a conex 3300 if there is a radio with that model number, can't remember. The guy lived about 8 miles or so from me. It sounded decent for a plug and play set up on his radio, but he had the bass turned up too high for his voice. I'm glad though they still make a desk microphone that has tone control for our radios without much modifications if any. Its too bad the cb radios are getting harder to modify for a wider audio bandwidth on transmit and receive.