• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • The Winners of the three Retevis radios 16 Anniversary giveaway are announced!! Click Here to find out if you won!

Ge superbase dead key watts

Ron Hall Jr

Member
Nov 23, 2020
4
1
13
57
hello, i am trying to get my superbase to dead key under 2 watts so i can add a small low drive amp to it, my problem is i turn vr1 all they way down and still have 4 watts. could the vr just need cleaned? as far as i know nothing has been cut or disabled on this radio. This is a new to me radio so i havent went entirely thru all the components yet but i did do a recap. the only other thing i have been told is that on an on air check i am told i sound pinched up a little. I have two other superbases that do not have this problem.
 

VR1 functions as a rheostat other words it is nothing more than a shunt there is a resistor across RV1 in parallel since it controls the current passing through the modulator transformer. You would have to be able to change VR1's value as far as I remember these don't adjust down that low without introducing more resistance in line with it a 5 or 10-watt wire-wound maybe another 10 ohms or so. Think of VR1 as a VARIAC so it needs to be a large wattage as it gets warm I believe in these radios it was a variable ceramic

https://i.ebayimg.com/images/g/dP8AAOSwPQlfIqvI/s-l300.jpg
 
VR1 functions as a rheostat other words it is nothing more than a shunt there is a resistor across RV1 in parallel since it controls the current passing through the modulator transformer. You would have to be able to change VR1's value as far as I remember these don't adjust down that low without introducing more resistance in line with it a 5 or 10-watt wire-wound maybe another 10 ohms or so. Think of VR1 as a VARIAC so it needs to be a large wattage as it gets warm I believe in these radios it was a variable ceramic

https://i.ebayimg.com/images/g/dP8AAOSwPQlfIqvI/s-l300.jpg
since i read your post i understand what it is i think. i am comparing two radios as i type this. and you are 100% correct it is a ceramic variable. thank you all for the responds. trying to learn and ask questions and not sound to stupid
 
  • Like
Reactions: Crawdad

dxChat
Help Users
  • No one is chatting at the moment.