Help locating one of these (dual gang pot)

[Eldorado828]

Good morning fellas. I'm looking for one of these dual pots with on/off switch like this one. It's a ranger style echo board pot that came with an aftermarket board. This one had a bent shaft so did my best to straighten it but internally its damaged. Anybody have one they can part with?

Thanks

 

[sp5it]

https://www.kenselectronics.com/lists/pots.htm maybe?

 

[AudioShockwav]

I have to say that Ken has really surprised me in the past.
I got a service manual for a old rare Robyn radio from him .
Good guy to deal with.

73
Jeff

 

[Eldorado828]

Thank you sp5it, I'll give it a shot.

 

[nomadradio]

Barkett has a bunch of dual controls used in stuff made by RCI.

Just doesn't seem to have that one. The center shaft is a 10k audio taper, hence the "A" suffix after the "103". Probably the echo volume knob.

The "104" 100k section is a linear taper pot.

Makes me wonder if you couldn't get by with the more-common 50KA/50KB control used with the echo boards built into a lot of radios. Also shows up as the volume/squelch/power control in mobile radios.

Here's what Barkett has: http://stores.goldeneagleradios.com/potentiometers/?sort=featured&page=1

Might have to settle for a substitute. The particular combo of resistance values in your control doesn't seem to be commonly offered for sale.

Unless Ken has it.

73

 

[Eldorado828]

Thank you nomad, I'd already tried barkett but looked again and nothing. I thought maybe amongst the many here it could be possible. I appreciate it sir.