Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Hey you broadcast engineer guys, who does this logo belong to?

nomadradio

nomadradio

Analog Retentive
I Support WorldwideDX.com!
Apr 3, 2005
8,571
14,240
698
Louisville, KY
www.nomadradio.com
I'm clearing out flotsam, and came across a rigid coax-line section with a right-angle fitting on it. The ID is 1.5 inches, and my next move was to post it on Fleabay.

a0pJXb.jpg


But I felt a little silly when I couldn't identify who made it.

Here's the logo. Wikipedia was no help.

F5dxDY.jpg


Anybody recognize this logo "C/P"?

I don't.

Pretty sure it's not "Chicago Pneumatic".

73
 
Last edited:

Good question. Must be fairly old. Standard size is 1 5/8 inch rigid line. At first I thought it may be CVP with the V being the thunderbolts in the middle. I only ever remember using Dielectric 3 1/8 rigid line or Andrew 1 5/8 or 2 1/4 heliax. That logo is not coming to me at all.
 
Try posting the question on Da ZED,.......I'm sure you will get some replies:eek:

Dayum,................ thats one big azz J Pole
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom