• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • The Winners of the three Retevis radios 16 Anniversary giveaway are announced!! Click Here to find out if you won!

HF Rig Purchase input needed

samplles

New Member
Feb 26, 2015
5
0
1
52
urgently need a hint.
that choose to buy! your opinion?
any of your opinion.
Icom IC-9100
Kenwood TS-590S
Yaesu FT-897D
Icom IC-7600
 

Those are four very different rigs at very different price points. However, if your requirement is a rig that covers HF/VHF/UHF, then I would choose the IC-9100 from that list.
 
  • Like
Reactions: 222DBFL
I own the Kenwood TS590S. There is a new version now available., the TS590SG with some enhanced improvements. You should be able to get a closeout deal on the older version TS590S if there are any left.

Bang for the buck could be as good as it gets for the TS590. I chose this and I am very satisfied. Great receiver, great audio, has free rig control software which is a single screen layout of the radio making radio configuration and settings all too easy.

I would love to have the Icom 7600 but at the time it was out of my price range and how much more do you get over the Kenwood for $2000 more?

Nothing against the Yaesu FT897 as for the performance, It's just when I was shopping for a mobile HF rig, I thought the radio was too small mainly the display screen.

I would recommend the FTDX 12000 or even better the FTDX 3000 for a Yaesu but I didn't see that on your list.

I would agree with Moleculo on the IC-9100.
 
Last edited:
The Icom's are in a lot higher price tier.

To answer your question for HF + 6 meters I would definitely pick the Kenwood TS590 of the models you listed.
The price difference between the TS590 and the Icoms would let you setup a nice antenna and even consider an amp.

As Fourstringburn mentioned the FTDX3000 would be a rig that I would really look at.
 
  • Like
Reactions: binrat
Going by your list, if you just want HF, I'd go with the Kenwood. A lot of rig for the money. If you want HF/VHF/UHF, then I'd go with the Icom. Big price jump though! Off list, I love my FTDX 3000 and would recommmend it. ;) And on edit, although it's a bit of an older rig, the Kenwood TS-2000 is a do-it-all rig that can be had for around 1500 bucks these days. I've talked to a lot of guys that run them, and they sound great with just a nice studio mic added to them.

73,
Brett
 

dxChat
Help Users
  • No one is chatting at the moment.