Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

hr2510 output

  • Thread starter Thread starter toad3126
  • Start date Start date
T

toad3126

Guest
just got a used 2510, hooked it up to the power supply and dummy load to test it. on ssb I got 25w, on am I got 7w swinging to 17w on average reading mode and 25w on peak mode. my meter is a Yaesu ys-60. with that kind of avg. power shouldn't the peak reading be higher, and shouldn't ssb peak be a lot higher? by comparison my modified uniden 76xl does 11w avg and high 20's peak on the same meter.


</p>
 

just got a used 2510, hooked it up to the power supply and dummy load to test it. on ssb I got 25w, on am I got 7w swinging to 17w on average reading mode and 25w on peak mode. my meter is a Yaesu ys-60. with that kind of avg. power shouldn't the peak reading be higher, and shouldn't ssb peak be a lot higher? by comparison my modified uniden 76xl does 11w avg and high 20's peak on the same meter.


</p>
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom