Is it safe to spray DeoxIT into relays?

[jtrouter]

Hello all
I am trying to restore a 12/74 PAL 351bdx and when i hook it up to a antenna there is no signal passing thru.
If i follow the schematic it should run thru a few legs of a relay so my first thought is to spray it out real good.
First a quick background the amp came out of a garage where it has sat for over 30 years and it was COVERED
in dust and a bit of dirt, Using a compressor and air gun along with a nylon brush i cleaned it and now it looks
almost like new, But i assume the relays have the same dust and dirt on the contacts,
So is it safe to spray it out? It would be a huge pain to unsolder it to run dollar bills thru it.
Thank you for reading and and hope for your replies.

 

[groundwire]

On the contacts, yes

 

[jtrouter]

On the contacts, yes

Sorry i dont want this to sound mean,,,,as opposed to?

 

[groundwire]

Sorry i dont want this to sound mean,,,,as opposed to?

as apposed to spraying down the whole thing, springs etc needlessly. deoxit is a contact cleaner, clean your contacts

 

[sp5it]

Aren't relay contacts gold plated? No need to spray anything.
If contact is bad it means gold layer is gone and relay should be replaced.

 

[W4KVW]

It will leave some residue just so you know.It does NOT 100% evaporate so dust will stick to it but it's good stuff.

SIX-SHOOTER
W4KVW

 

[jtrouter]

Thank you, that's what i thought you meant,