Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

is the Galaxy 95T2 worth buying for 11 meter use?

No quality control crap :(
Bad solder joints, not working backlight, noisy inverter for backlight, misaligned usb/lsb/am each in different position clarifier position. Had to open it, align, fix non working backlight and find bad soldering.
Brand new crap :(
Is anyone testing it before leaveing barn in middle China?
My 20 years old ss3900 better seat in frequency better than that.
I had 7 of 95t2 to align them before use. All brand new. None of them were propertly aligned.
Mike
 
sp5it said:
No quality control crap :(
Bad solder joints, not working backlight, noisy inverter for backlight, misaligned usb/lsb/am each in different position clarifier position. Had to open it, align, fix non working backlight and find bad soldering.
Brand new crap :(
Is anyone testing it before leaveing barn in middle China?
My 20 years old ss3900 better seat in frequency better than that.
I had 7 of 95t2 to align them before use. All brand new. None of them were propertly aligned.
Mike
Click to expand...
THEY DON'T MAKE THOSE RADIOS LIKE BEFORE..
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom