Kenrich Eagle 500 Help!

[paws264]

I have an Eagle 500 on the bench that someone TRIED to repair; it ended up being pulled from one shop and given to me.

The main Antenna switch relay has problems, it has burned the printed circuit board from under it.

Can someone with a working Eagle provide me with a picture of the PCB that the relays are mounted on, I am going to hard wire in relay in after I clean up the burned out area.

.

 

[histeel]

Try the Quakshack.com, look under non ham linear amplifiers, There is a thread about the eagle 515 the pcb is the same as the 500. there are some great close ups of the pcb.There is also a video of the pcb on you tube just search for eagle 500. I just completed a rebuild of an eagle 500 if the pics on the quackshack dont help I will snap a few and post them. Good luck

 

[loosecannon]

paws, here is a link to the thread histeel is referring to:
http://thequackshack.com/index.php?...58944__hl__kenrich__fromsearch__1#entry258944

it does look like there are lots of pics there and one of them might be the one you want. the pics are freaking HUGE! though.

you will have to sign up to be able to look at the thread if you're not already a member.
LC

 

[357]

what was that brown goop?
Those pictures on quackshack were my 515.
Had to sell it due to financial difficulties