Looking for pictures of homemade radio benches

[c316buckeye]

made out of reclaimed Austrian pine and some other stuff. not mine, but built with and for a friend who was using plywood on sawhorses for years.

 

[TheRealPorkchop]

Ok, so I built this for my shop as my bench… I changed it a bit, I added shelves to the “hutch” and I slid that farther back to give more room on the bench top. Laid down a static mat, some linoleum tile around the edges and various other “crap”. Not something you’d want to put in your house I don’t guess but for a shop setting, this works great. It’ll hold whatever you put on it too.

How to Build a DIY Wood Workbench: Super Simple $50 Bench

This DIY workbench is simple enough and cheap enough that you can make it in a morning, and yet it's big enough for serious woodworking and hobby projects.

www.familyhandyman.com

 

[G-Golly Wally]

Been working on my radio room /shack my setup will be 50/50 . A slightly modified computer table and some homemade shelving, in my mind it looks good we'll have to see if it actually turns out that good. Ran into a slight problem, the bit i need i apparently lost so in stand still until the hardware store opens Monday. Will post pictures tomorrow, hopefully.

 

[c316buckeye]

very limited space in apartment, it all had to fit in this corner and clear 2 baseboard heaters. vertical space was the only way to manage it all (if you want to call that managed)

 

[G-Golly Wally]

View attachment 75086very limited space in apartment, it all had to fit in this corner and clear 2 baseboard heaters. vertical space was the only way to manage it all (if you want to call that managed)

I would say you have definitely maximized your limited space. Good job.

 

[FlyBoy50]

If I get some time I'll get a picture of my cobble job which was a little tiny apartment office desk which I took a sheet of plywood and made a drop on expanded table top and expanded that with a back top shelf. And it's constantly evolving. LOL

 

[G-Golly Wally]

I'm confined to this one little corner. In the pantry/shack 98% pantry 2% shack i just got the shelves finished and put up late this afternoon, think it turned out ok. I replaced the shelf with a bigger board and added some extra support to hold the Eagle amplifier, that thing is a tank. I had the board's for the shelves the trim came from the cabinet shop scrap pile down the road.

 

[TheRealPorkchop]

It’s not the size of the “shack”, it’s the size of that hamma, come on!!

 

[Eldorado828]

It’s not the size of the “shack”, it’s the size of that hamma, come on!!

Put it down with that big Johnson