mic plugs

[KD2GOE]

where can i get more of the mic plugs i got with my kenwood?

the top one in this pic.. i got some from radio shack and there junk the one on the bottom.

 

[fourstringburn]

Can't tell the pin-out in the pic. IMHO, as long as you make a solid and neat solder joint, I can't see where one connector could be much better than another.

Here is a link where you can buy virtually any pin-out you are looking for.

http://www.universal-radio.com/catalog/parts/micconn.html

 

[rabbiporkchop]

where can i get more of the mic plugs i got with my kenwood?

the top one in this pic.. i got some from radio shack and there junk!

http://i190.photobucket.com/albums/z172/mkubiak402/mic plug_zpsd3kjnyna.jpg

Have you tried
http://www.cheapham.com/

Or here's one on Ebay for $5.50 shipped.
http://m.ebay.com/itm/162536845062?_mwBanner=1

 

[KD2GOE]

No i want the ones that look just like the stock kenwood The part that you grip to screw it in. every other part like the RadioShack one i got you can't grip it to screw or unscrew it from the radio.. and the contacts in it are noticeable weak.

 

[KD2GOE]

I fixed the pic on top

 

[w9cll]

No i want the ones that look just like the stock kenwood The part that you grip to screw it in. every other part like the RadioShack one i got you can't grip it to screw or unscrew it from the radio.. and the contacts in it are noticeable weak.

I have been using RS mike connectors for years and never had a problem with them. I have to admit that once I plug a mic in I rarely unplug it. Its all a moot point now that RS is all but gone.

 

[KD2GOE]

I have been using RS mike connectors for years and never had a problem with them. I have to admit that once I plug a mic in I rarely unplug it. Its all a moot point now that RS is all but gone.

I dont switch them a lot its just i have had a run of bad mic plugs the little fingers that holed the pins are week and i am braking up a lot when i talk..

 

[RatsoW8]

Heil makes some nice ones but not sure they sell them separately anymore.

 

[Robb]

Wonder how many actual mfrs that are that make these plugs? Amphenol? Who else? Probably a company in China makes these for Amphenol under contract/license.

Never had any problems with these plugs. One goes bad, just toss it and put on another one. Same plug body with a different pin-out number is all I've seen . . .