need help with transistor

[1iwilly]

hello to all looking for help in trying to obtain at least 3 2sc1306 transistors thanks

 

[AudioShockwav]

The Mitsubishi 2sc1306 and 1307 have been gone for a while.
HG makes a 2sc2166 that will work.
What's the application?

73
Jeff

 

[nomadradio]

The best replacement for a part long-since discontinued depends in part on the circuit where it's found.

The 1306 was used as the driver transistor in sideband CB radios. And in AM-only models, it was used as the final stage. Hasn't been made for decades.

The 2SC2166 is what the radio factories switched over to when the 1306 was no longer made. This is the best choice as a sideband driver transistor.

An AM-only CB may also use the 2SC2078. Those are still showing up in new AM-only radios made recently.

And there are other substitute numbers that are valid, but all of those are also discontinued.

73

 

[1iwilly]

The Mitsubishi 2sc1306 and 1307 have been gone for a while.
HG makes a 2sc2166 that will work.
What's the application?

73
Jeff

it's for my cobra 2000 and 148 side mike made in taiwan

 

[Low_Boy]

2sc2166

 

[loosecannon]

2SC2166 Original Mitsubishi Transistor

ranger radio parts, connex replacement parts, galaxy radio parts, superstar radio parts, cb radio repair, amateur radio components, replacement knobs, replacement switches

stores.goldeneagleradios.com

 

[nomadradio]

2SC2166 is what Uniden's assembly line used after the 1306 was discontinued. If your radio was built with a 1306, it must date back to 1981 or earlier, pretty sure.

73

 

[Shadetree Mechanic]

I got some from Barket electronics a while back for my Madison.

Oh, yeah that's Golden Eagle. My bad.