-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
PAL VFO PLUS “H” question
- Thread starter Crambone
- Start date
The listing for "H" says the output frequency is 16.115 MHz. This suggests a crystal frequency 5 MHz lower, 11 MHz plus a little.
If your crystal is marked 16.115, I'll be surprised. That would get you an output frequency above 21 MHz.
Sounds like the "H" version should work on the SSB Mark 3 transmitter the way it is. A tweak to the dial-calibrate trimcap should be all the conversion it would need.
73
If your crystal is marked 16.115, I'll be surprised. That would get you an output frequency above 21 MHz.
Sounds like the "H" version should work on the SSB Mark 3 transmitter the way it is. A tweak to the dial-calibrate trimcap should be all the conversion it would need.
73