You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Can anyone tell me which wire to disconnect to disable the amp board on my 2979n2? I seem to recall seeing a tech unplug a brown wire, but I cant remember. I just want to tweak my modulation settings, but my 20A power supply wont hold it.
should be two wire connector in front of the finals, just unplug it to disable the amp section, yes brown wire is correct.
if you want to add a switch, use brown wire to switch then you can turn amp on and off
ok, thanks very much. I need a bigger power supply. My 20a MFJ will run my 110w Motorola Spectra just fine. But it wont hold the peak demand from my N2 lol
I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.