Can anyone tell me which wire to disconnect to disable the amp board on my 2979n2? I seem to recall seeing a tech unplug a brown wire, but I cant remember. I just want to tweak my modulation settings, but my 20A power supply wont hold it.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Ranger 2970n2 Question
- Thread starter KD8HMO
- Start date
should be two wire connector in front of the finals, just unplug it to disable the amp section, yes brown wire is correct.
if you want to add a switch, use brown wire to switch then you can turn amp on and off
http://cbradiomagazine.com/Radio Reviews/RCI-2970N2/RCI-2970N2.html
looks like brown and black wire connector, above links has pictures
if you want to add a switch, use brown wire to switch then you can turn amp on and off
http://cbradiomagazine.com/Radio Reviews/RCI-2970N2/RCI-2970N2.html
looks like brown and black wire connector, above links has pictures
ok, thanks very much. I need a bigger power supply. My 20a MFJ will run my 110w Motorola Spectra just fine. But it wont hold the peak demand from my N2 lol