So far I'm just putting a power connector in this radio and then testing it. This is just something I noticed. If this microphone ever goes bad the owner is screwed! You can't change the channel, the volume, or the squelch on this thing without the microphone. But they put a knob on the front for a dimmer. LOL
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
RCA CO-PILOT 14T305
- Thread starter ClaimJumper
- Start date
Only if it doesn't function. Still haven't tested this thing out. I just got the power connector soldered in. I can't solder a 12 pin plug anyway. I don't think the owner wants to go that far either.
I would convert it to a 4 pin, then put some push buttons on front for the up/down fuction. 
But that is too much trouble.. 
I tried selling one last year here locally for a whopping $5 and nobody bought the damn thing. 
But that is too much trouble.. I tried selling one last year here locally for a whopping $5 and nobody bought the damn thing. 
I go all out on any 02A Cybernet, but that’s just me. The two push buttons would be mounted below the MOD indicator. The RF gain would be the volume, and the DIM knob would become the squelch. The 4 pin jack would be wired for any Cobra mic.....While I’m at it, incandescent bulbs would be changed over to LED’s.
