Picked up a 2980WX with the (EPT-690010C board). The radio was functional BEFORE a main board recap was performed. After the recap, the radio would go into tx as soon as you powered it up. The frequency counter reads correctly but no channel display and no meter lamps. What I found was C112 has a backward silk screening on the board as well as C157. I found this out by looking at the picture (CB TRICKS) of the top side main board layout...going over the polarity of each electrolytic capacitor. Can someone assist to getting this thing back working? Both C112 and C157 have been replaced as per the picture Not the silk screening on the board.