Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Retevis HS4 frequency adjustment

Hawkeye351

Hawkeye351

Sr. Member
Jun 27, 2021
842
775
103
58
Anyone know where the transmit frequency adjustment is on the HS4 boards?

Also, a local friend of mine asked me if there's any way to add the VFO windup to the Retevis HS4, I told him I wasn't sure and would have to look over the schematic first. However, I can't find a scheme for this radio, and the anytime 5555 shows np transmit frequency adjustment.
 

Search for AT-5555 frequency adjustment - it is the same procedure as the newest versions will apply to the HS4. It is menu driven. Here:



HOWEVER - the chances of a new HS4 being off-frequency are extremely low. This almost never happens. These radio are rock solid stable. What issue are you having?

The HS-4 has no VFO support, the firmware doesn't allow for it unfortunately. It is stuck in CH mode with some ability to move +/- with the clarifier control, in a VFO-ish way.
 
Last edited:
  • Like
Reactions: Hawkeye351 and Eldorado828

dxChat
Help Users
  • No one is chatting at the moment.
  • @ Hambones amps:
    Does anyone know if you can replace the 2290 in a galaxy dx 93t twin turbine with a 2sc2879 red dot? If so, what would have to be tuned?
  • @ BayouRadioAmplifier:
    hello
  • @ ShadowDelaware:
    Hambones the entire amp section would have to be retuned, and the rf transformers re wrapped.
  • @ BJ radionut:


      Top Bottom