ROBYN T-240D L181 location?

[Crambone]

looking at SAMS Photo Fact under Synthesizer Alignment it shows to adjust L181for 1.8V.
I can’t locate L181 I don’t even see it on the schematic?

 

[Shadetree Mechanic]

Found it, please stand by.

 

[Shadetree Mechanic]

On the schematic that is.

 

[nomadradio]

Small circuit board with the chips on it, behind the channel selector, sorta.

Terribly awkward to reach as I recall. What voltage do you get now at that test point on the channel they specify? This is your PLL tuning voltage, and changes for each channel.

73

 

[Crambone]

On the schematic that is.

View attachment 39314

Uhhh I can’t believe I missed it

Small circuit board with the chips on it, behind the channel selector, sorta.

Terribly awkward to reach as I recall. What voltage do you get now at that test point on the channel they specify? This is your PLL tuning voltage, and changes for each channel.

73

I’m seeing 1.24v now

 

[nomadradio]

I’m seeing 1.24v now

On what channel?

73

 

[Crambone]

On what channel?

73

I found the SAMS and got everything back to normal, radio works great now. Once again thank you