• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Stryker SR-65bc vs Ranger SRA-198 on Stryker 955HPC

Supspt454

Active Member
Sep 10, 2012
58
32
28
Oklahoma
Been looking at both of these mics for a noise canceling option in mobile. They both have good reviews. Has anyone got either of these mics currently in use? I know the last Astatic I bought was garbage from quality stand point. PTT switch was junk from the factory.
 

I bought an entire batch of the SRA-198 when I found them at $19.95/ea. I think well enough of them they are the backup mike for at least six radios.

I don’t have the experience of many around here, but I’m sure there no such thing as a microphone too many. Get at least one and don’t sweat it. Drop back in it’s sleeve, roll it up in bubble wrap, and store it in a desk drawer . . .

. . unless, like me, you want at hand a quick reference mike for any setup.

Alternately, take the blackjack or sap out of the cars glovebox. Store this instead. Swing that SRA at a parking lot Goliath and he’s going down.

It slices, it dices . . . .

.
 
I like that the SRA has the PTT on the same side as most mics which the Stryker mic is in a weird place. However, sound quality is what I’m after. So PTT button locations aren’t super important.
 
  • Like
Reactions: Silverbullet516

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.